fa fa-chevron-left Press Release

A Dripping Faucet Can Kill the Chance for Romance Thursday, March 31st, 4:00 PM
Nevada-based plumbing professionals share how to fix that awful dripping faucet.

Sparks, United States - March 31, 2022 / Ira Hansen and Sons Plumbing /

Drip, Drop, The Leak Needs to Stop

Is there anything as annoying as a leaking faucet? There are very few things on that list, perhaps nails on a chalkboard or the neighbors playing unwelcome music at all hours. The sink drip can be dealt with quickly and easily if a homeowner is in the mood for some daring or not-so-daring DIY. 

water bill

Hazards and Harms of a Leaky Faucet

A leaky faucet is more than an annoyance; allowing it to drip continually can cost more than 3 gallons of water per day. If the leak is even more severe, it can waste about 30 gallons per day. It can add hundreds of dollars to a yearly water bill. 

Another issue that arises from leaks is the risk of mold and mildew. These growths are unsightly, but they can also lead to health problems if certain types of mold are involved. 

Leaky Causes: Common Mood-Killing Culprits

While every faucet design is different, standard features and parts prevent the valves that keep the water in the pipes from closing completely. Though these parts are often tiny, they can affect the whole system if they wear out or loosen.

  • Cartridge: This is a valve and washer combined into one piece that sits on the pipe stem and allows or inhibits the flow of water when the handle turns. It is the most common type of faucet handle mechanism. 
  • O- Ring: This flat piece of silicone is a hard-working part of the handle. Wear and tear cause loosening and damage to this piece, and it may need replacing.
  • Washers and Seals: Sediment in the pipes and corrosion can cause these parts to break.
  • Stem Seat: This piece is essential to keeping the water from flowing. It is a silicone or rubber piece sometimes accompanied by a spring nestling into the pipe below the handle. The entire handle mechanism sits on this piece.
  • Nuts and Bolts: Age and use can cause these pieces to loosen. They may need a quick tightening with a wrench.

 

faucet

DIY Love: Replacing a Sink Cartridge

This article will discuss the replacement of cartridge faucets because they are the most common type. Cartridge faucets usually have two rotating handles to turn the water flow on or off. Other types include disc, ball, and compression faucets. Leaky faucet repair for these types is slightly different, but the basics are the same.

Steps for replacing a single handle cartridge:

  1. Turn off the water using the valve below the sink.
  2. Remove the stem screw cover.
  3. Remove the stem screw and handle.
  4. Remove the old cartridge.
  5. Verify placement of stem seat, O ring, and spring if applicable.
  6. Replace with a new cartridge.
  7. Replace the handle and stem screw.
  8. Test the water by turning it back on and turning the newly repaired handle.
  9. Replace the decorative cover.
  10.  Enjoy the newly repaired sink.

If a homeowner has doubts about their do-it-yourself chops, the professionals are always there to help. 

About Ira Hansen and Sons Plumbing

Since 1986, Ira Hansen and Sons Plumbing has provided excellent plumbing solutions in Sparks, NV, and the surrounding areas. Call today for details on their preferred customer program and their emergency service.

Contact Information:

Ira Hansen and Sons Plumbing

58 Hardy Drive
Sparks, NV 89431
United States

Jacob Hansen
(775) 626-7777
https://www.ihsplumbing.com/

Original Source: https://www.ihsplumbing.com/press-releases

Terms & Conditions Privacy Policy

© {{ new Date().getFullYear() }} Archive Place.